Base, round (4,2 kg)

50 cm diameter with threads for the post.

Base, square (4,2 kg)

45 x 45 cm flat base, perfect when you want to slide the base under a carpet. All FlexiT uprights can be installed on this base.

Telescopic Upright (2,8 kg)

The telescopic FlexiT upright can be extended up to 3 meters in height. Lowest height is about 110 cm.

ClipiT (130 g)

Fastens at the bottom of the post and works well when only one post is used and when using RolliT. Two can be attached to the same post allowing images on both sides. ClipiT also has a magnet, which allows the image’s lower corners to be moved so that the base is not visible.

Image stretcher with tubing (550 g)

10 cm wide shaft that is mounted on a 20 cm long FlexiT tube that is mounted under the telescope. Often used in combination with several posts and aluminum rails. Also has an attachment on the backside allowing images to be fastened to both sides of the post.

Tubing, short (150 g)

20 cm long sections with threads on both ends to fasten to the base as an extension under the telescoping pole. Several sections of tubing can be put together under the telescope. Diameter is 6 cm.

Tubing, long (170 g)

50 cm long sections with threads on both ends to fasten to the base as an extension under the telescoping pole. Several sections of tubing can be put together under the telescope. Diameter is 6 cm.

Image stretcher (400 g)

Use this piece to stretch the image downwards for that perfect look. Often used in combination with several uprights on the width and a bottom aluminium profile.

Top clamp (470 g)

The top clamp is 10 cm/4 inches wide and can be installed on any FlexiT upright. Please note the option to install images on both sides of the Top clamp. The clamp accepts both the RolliT and different aluminium profiles.

RolliT (260 g/m)

5 cm wide double metal rail covered by polyester socks or Velcro. Can be rolled for easy storage. RolliT also allows images to be displayed with round and soft edges. You can easily bend Rollit rails along the backside of a FlexiT top.

Endcap curved (100 g)

An endcap for a nice curved ending on the sides of FlexiT

Aluminum profile for bottom pipe pocket (600 g/m)

A rectangular aluminium profile for a flat look when inserted into the bottom pipe pocket of an image.

Aluminum rails with Velcro (600 g/m)

4,5 cm wide aluminum rails with Velcro that bend to the desired form. Sturdier than RolliT and used primarily for larger images. Also works well for arched images.

Lamp (600 g)

200 watt lamp with a 40 cm long arm that fastens to the top of the FlexiT. Comes with two types of fastening depending on what angle the lamp will be mounted. The grey cord is 330 cm long.